All products
74 products
CSF
RF Cable

CSF Series: Semi-Flexible Coaxial Cable

CSF Series semi-flexible coaxial cables solve dense interconnect challenges in phased array radar and ECM systems. OD from 1.19 mm (CSF047) to 6.85 mm (CSF250FEP). 100 dB shielding eliminates co-site interference. Silver-plated copper clad steel center conductor, PTFE dielectric, 40 GHz (CSF047/CSF086), 50 Ohm, 70% Vp. Hand-formable, 4 mm static bend radius. Unjacketed and FEP-jacketed variants with identical RF performance. -65 to +150 deg C. 500 to 3500 V DC withstand.

View product
CM
RF Cable

CM Series: Low-Loss Communication Coaxial Cable

Facing signal dropouts, weathered cable cracking, or tight routing issues? AO Microwave’s CM Series communication cables protect your network. Encased in rugged, UV-resistant PUR jackets, these low-loss, low-VSWR cables prevent environmental degradation and costly downtime. Highly flexible (static bend radius down to 6.4mm) and built with solid copper/Foam PE cores, they ensure stable transmit power and smooth installation in base stations and vehicle networks up to 10 GHz.

View product
CA
RF Cable

CA Series: Ultra Low Loss & Amplitude/Phase Stable Flexible Coaxial Cable

CA Series Coaxial Cable is engineered for high-precision RF and microwave measurement systems requiring extremely low insertion loss and exceptional amplitude and phase stability. This high-performance RF cable assembly is widely used for vector network analyzer testing, antenna measurement systems, radar electronics, satellite communication equipment and 5G mmWave RF test environments where stable signal transmission and repeatable measurement accuracy are essential.

View product
CB
RF Cable

CB Series: Low Loss & High Power Flexible Coaxial Cable

AO Microwave’s CB Series features low-loss, high-power flexible coaxial cables designed for transmitter feeds and telecom stations. Utilizing a solid PTFE dielectric and a robust FEP jacket, the series ranges from 4.60mm (CB460) to 14.70mm (CB1500) outer diameters. Its triple-shielded structure (silver-plated copper foil, aluminum laminate, and wire braid) provides >90 dB shielding. Stable under high CW power, making it suitable for base stations and RF testing

View product
CC
RF Cable

CC Series: High Precision Test Level Coaxial Cable

CC Series test-level coaxial cables from AO Microwave cover DC to 110 GHz across six models. Built on silver-plated copper conductors and dual-PTFE dielectric architecture, every CC cable delivers 50-ohm impedance, 90 dB shielding, and repeatable phase stability from -55 degree C to +165 degree C. Whether calibrating a VNA at 67 GHz or routing through a thermal chamber, CC Series gives your measurement chain the low-uncertainty, traceable performance that metrology-grade testing demands.

View product
CL
RF Cable

CL Series: Low Loss Coaxial Cable

When avionics and electronic warfare systems demand RF cabling that survives -55C to +165C with 90 dB shielding, the CL Series eliminates guesswork. Nine models (2.33 to 9.40 mm OD) span DC to 40 GHz on one PTFE dielectric and FEP jacket platform. Stranded-conductor variants (CL520S, CL530S) absorb vibration without phase drift, while CL900 and CL940 handle 2.6 kW at 1 GHz for broadband jamming. Qualify the material set once and scale across your entire frequency ladder.

View product
CE
RF Cable

CE Series: Economical Semi-Rigid Coaxial Cable

For dense RF packaging where flexible cables fail, CE Series semi-rigid cables hold their exact formed shape—eliminating phase drift and spring-back. Low VSWR and Low PIM ensure clean multi-carrier signals, while 165 dB shielding blocks crosstalk in tight enclosures. Six models cover DC to 40 GHz, with cost-optimized CN variants for 18 GHz systems. Bend radii down to 1.27 mm and weights from 2 g/m suit production-volume RF instrument interconnects, phased-array modules, and airborne payloads.

View product
CF
RF Cable

CF Series: Low Loss Semi-Rigid Coaxial Cable

You're past 26 GHz and your cable is the weak link—phase drifts with temperature, leakage corrupts calibration. CF Series semi-rigid solves both: seamless copper tube with 165 dB shielding stops crosstalk at any routing density, and <750 PPM phase stability keeps VNA measurements repeatable all day. Three OD options (1.19–3.58 mm) fit a probe station or a phased-array backplane. Pre-formed assemblies ship tested and ready.

View product
CK
RF Cable

CK Series: Low Loss & Amplitude Stable Semi-Rigid Coaxial Cable

When flexible cables fail in dense RF instruments and phased arrays, CK Series semi-rigid cable delivers. Seamless copper tube achieves 165 dB shielding regardless of packing density. PTFE dielectric at 81% Vp with <750 PPM phase stability. CK086: 40 GHz in 2.18 mm OD, 7 mm bend radius. CK141: lower loss and 4x power to 26.5 GHz. Pre-formed, connectorized, VNA-verified assemblies. Contact sales@aomicrowave.com for your routing requirements.

View product
CG
RF Cable

CG Series: Low Loss Economical Coaxial Cable

Signal loss in your cable is money lost at the receiver. CG Series low-loss coax preserves signals DC–18 GHz—don't pay for gain you shouldn't need. Five OD options (3.60–8.10 mm) fit a drone wing or a base station, without overpaying for specs you won't use. Rated -55°C to +125°C; optional PUR jacket handles UV and moisture outdoors. 70 dB shielding keeps crosstalk low. RoHS/REACH. Tell us your frequency, length, and environment—we'll match the right cable.

View product
CJ
RF Cable

CJ Series: Multicore Low Loss Flexibile Coaxial Cable

Struggling with stiff cables causing connector damage in mobile radio systems? AO Microwave’s CJ Series multicore low-loss flexible coaxial cables are the solution. Pairing stranded silver-plated copper conductors with PTFE dielectrics, they offer superior flexibility and high velocity of propagation (81-82%) up to 18 GHz. With a 90 dB shielding effectiveness and PUR jackets (OD 5.00mm to 10.00mm), they prevent joint stress and handle harsh environments. Ideal for radio equipment.

View product
CT
RF Cable

CT Series: Economical Internal Interconnection Coaxial Cable

Tired of rigid cables straining your solder joints? AO Microwave’s CT Series offers economical, highly flexible internal interconnect cables up to 40 GHz. Designed to replace semi-rigid and semi-flexible lines, these FEP-jacketed cables eliminate spring-back forces and prevent joint shear. With solid PTFE dielectrics, 90 dB shielding, and outer diameters from 1.45mm (CT160) to 7.00mm (CT700), they ensure stable, low-loss routing for compact chassis and radars.

View product
Page 1 of 7
Chat with us